Hire Sennheiser SR 300 IEM G3 from £0.00 - Sennheiser SR 300 IEM G3 Rental

Name: Hire Sennheiser SR 300 IEM G3 from £0.00 - Sennheiser SR 300 IEM G3 Rental
Brand: Sennheiser
SKU: SKU548
Availability: InStock

Description

"This is a stereo transmitter, which can operate in mono, fed from the left audio input socket, powered by 12V DC from an included adapter. The metal case can be rack-mounted.

The front panel has a 6.35mm headphone socket, for local monitoring, with an associated volume control. A back-lit 'sync' button is used to transfer settings to a receiver. The back-lit, graphic display shows status. A standard display is presented at switch-on, showing signal levels for the two audio channels, frequency bank and channel, current transmission frequency, the name of the transmitter, transmission status and power, the current equaliser settings, the audio input sensitivity and whether the lock-mode is active. Settings are made using a jog wheel in conjunction with a menu, including a 5-band-equaliser to tailor the audio signal. An auto-lock function avoids accidental changing of settings. The transmitter can be connected to an Ethernet network, for control by a computer using the Wireless Systems Manager software, which may be downloaded; this delivers an overview of monitoring and data management for multi-channel systems.

On the rear, a coaxial socket is provided for power, an RJ45 connector connects to a network. Two combination jack and XLR connectors provide balanced, line-level audio inputs; two 3-pole jack sockets provide loop-out connections to connect to other equipment. The antenna output is a BNC connector.

Audio input: + 22 dBu maximum. Frequency response: 25Hz – 15kHz (headphones). Distortion: Less than 0.9% THD. Noise: Better than 90dBA. Modulation: FM, MPX-stereo. RF frequency range: 516 – 865 MHz. RF output power:10/30 mW switchable. Peak deviation: +/- 48 kHz: Compliance: ETS 300422, ETS 300454, 15 mW; ETS 301 489-1 / -2; FCC Part 74.861 / CANADA RSS-123, 100 mW. Power source: 12V DC, 350mA maximum. Dimensions: 212 x 202 x 43mm. Weight: 980g.

Included accessories: GA 3 rack-mounting adapter, to mount one or two receivers in a 1U 19 inch rack, NT 2 power supply unit, 12V DC output, 100-240V, 60/60 Hz input, with country-specific adapter, antenna, operating instructions."

Hire FAQ

Where can I find a copy of your Terms & Conditions?

You can find a copy of our Terms and Conditions here.

If you need clarification on any points please get in touch.

Where can I get instructions, manuals and videos from?

All the available manuals for our products can be found on the Full Kit List page which can be accessed from the top menu.

Browse to the product that you require the manual for. Underneath you will find three icons. One for the manual, one for the manufacturers product page and the last for a video of the product. Simply click on the appropriate icon.

You will need Adobe Acrobat Reader in order to view the manuals.

Can you operate the equipment for me?

We are more than happy to set up the equipment for you. If you just want it connected we can provide this service or should you need a DJ or sound engineer for the entire event then we can assist with this.

We are able to provide service from a DJ all the way up to full production to a festival.

Get in touch and one of our team will be happy to answer any questions you may have.

Can you set up or take down the equipment for me?

All the service are flexible and will be made to fit around your needs. Prices for a sound engineer start from as little as £20 per hour with deals for set periods of time.

If you require this or any other service then please give our team a call on 020 3333 4444 or e-mail us using the form here.

Where can I get insurance from?

If you do not have insurance to cover your event then there are many organisations that can assist you with one off policies.

One such company is Events Insurance. Events Insurance are not affiliated with London Speaker Hire and we are providing this as a helpful link only.

When requesting insurance please check your quote for the total equipment cover required.

Do I need insurance?

As part of our terms and conditions of hire you need to make sure that you have an insurance policy that covers you for the full replacement cost of equipment as per our Terms and Conditions.

Your quote will provide you with the total amount this comes to.

How do I pay by bank transfer?

If you would like to pay by bank transfer then please use the bank details listed on your quote.

It’s imperative that you use the quote number as your payment reference as there will be a delay in your booking confirmation if we do not have this.

If you have any questions on paying through your bank please do get in touch by calling us on 020 3333 4444 and we will be happy to help.

Can I pay by cash or cheque?

Unfortunately we are unable to accept cheques or cash payments.

How can I pay for my hire?

To make it as easy as possible for you to pay, you can use our secure online payment system (which can be found here) any time of the day or night. This system allows you to pay by debit or credit card. Our secure payment processing partner is Square Payments.

What ID do I need for a business hire?

For corporate hires please speak to one of our team on 020 3333 4444 who will be happy to run through the requirements.

What ID do I need for a personal hire?

When hiring from London Speaker Hire you will need to provide three forms of identification.

The first ID must be a UK passport which will be held for the duration of the hire. The other two forms of ID needs to be a utility bill or bank statement with your name and address on it. Unfortunately we are unable to accept mobile phone bills.

These ID’s will be returned to you upon the return of the equipment.

When hiring equipment we will take a copy of your credit or debit card for authorisation (it will need to be in the same name as your identification). No money will be charged to it but a check will be run to make sure it is a valid card.

How do I make a booking?

Making a booking is a very simple process:

1) Decide which kit and services you require. If you are not sure give us a call on 020 3333 4444 or use this form to contact us and we will give you the best advice.

2) Complete the hire form which can be found here. To help us give you the best quote possible please make sure you include as much information as possible.

3) Sit back and relax! One of our friendly team will get back to you with a quote via e-mail. All you need to do is read through the quote and confirm that the information is correct and as required.

4) As soon as you have made the deposit payment to confirm you booking we will pop you over an e-mail to let you know the kit and services are reserved ready for you.